+86 137 6041 5417
call on order
+86 137 6041 5417
CATEGORIES
RECOMMEND
3M Double Coated Polyethylene Foam Tape
Min Order Quantity: 1000 Square Meters
Supply Ability: 15000 Square Meters
Port: Shenzhen, China
Payment Terms: T/T, L/C, Paypal, Western Union
Delivery Time: About 10-15 days
3M Double Coated Polyethylene Foam Tape
3M Double Coated Polyethylene Foam Tapes 4492G, 4492W, 4492B, 4496W and 4496B combine a conformable closed-cell foam with a high strength acrylic adhesive that provides good initial tack and offers high ultimate adhesion to a wide variety of surfaces.
Features:
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier.
- High ultimate adhesion to a wide variety of surfaces.
- Conformable tape bonds to irregular surfaces.
- Unique rubber adhesive system provides quick stick.
- Adheres well to most low surface energy (LSE) materials
Packaging Details:
Export standard packing for Double Coated Polyethylene Foam Tape. (If customers have special requirements, we also can make accordingly.)
Our Factory Competitive Advantages:
- Well Competitive Prices and High Quality Control
- Prompt Delivery
- Earth-friendly Products
- In a Variety of Design
- Small Order Acceptable
- OEM Accepted
Note: All data contained in this document base on china standard test method, they are average values, they should not be used for a specific purpose. All statements, technical information, and recommendations contained are base upon tests that we believe are reliable, but we strongly recommend clients should do their own tests and decide whether the product is fit for a particular purpose or the method of application.
These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.
- Signs, Nameplates and Plaques.
- Point of Purchase and other Displays.
- Plastic Hooks, Racks and Dispensers.
- Wire and Cable Clips – meets UL Spec QOQW2.MH17478.
- Appliance, Display Case and Electronic Equipment Trim.
Typical Physical Properties:
| Typical Physical Properties and Performance Characteristics | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
| Peel Adhesion: To Stainless Steel Room Temperature 90° Angle Peel 12in./min. Jaw Speed (308mm/min.) 72-hour Dwell ASTM D-3330 | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | |
| Static Shear: 1/2in.²(3.23cm²) overlap will hold for ASTM D-3654 | 72°F(22°C) | 1000g | 1000g | 1000g | 1000g |
| 120°F(49°C) | 250g | 250g | 500g | 500g listed weight | |
| 158°F(70°C) | - | - | 250g | 250g 10,000 min. | |
| Normal Tensile: (T-Block) 1 in.²(6.45cm²) Jaw Speed 2 in./min. (50mm/min.) 72 hour Dwell ASTM D-897 | 60lb./in.² (415kPa) | 40lb./in.² (275kPa) | 60lb./in.² (415kPa) | 40lb./in.² (415kPa) | |
| Dynamic Shear: 1 in.² (6.45cm²) overlap Jaw Speed 0.5 in./min. (12.7mm/min.) ASTM D-1002 | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | |
| Temperature Resistance | Short Term (Minutes, Hours) | 158°F (70°C) | 180°F (82°C) | ||
| Long Term (Days, Weeks) | 120°F (49°C) | 158°F (70°C) | |||
| U.V. Resistance | Not recommended for direct exposure to U.V. light. | No apparent degradation when exposed for seven days in U.V. chamber. | |||
| Solvent Resistance: Splash testing cycle-20 seconds submersion, 20 sec. air dry, 3cycles | No apparent degradation when exposed to splash testing of typical hydrocarbon solvents. | ||||
Construction:
| Construction | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
| Adhesive Type | 745 (Rubber Adhesive) | 430 (Acrylic Adhesive) | |||
| Adhesive Carrier | Closed Cell Crosslinked Polyethylene Foam | Closed Cell Crosslinked Polyethylene Foam | |||
| Thickness | Nominal | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) |
| Tolerance | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | |
| Foam Color | White(W) / Black(B) | White(W) / Black(B) | White(W / Black(B) / Grey(G) | White(W) / Black(B) | |
| Release Liner | 0.003in. White Paper (0.08mm) | 0.003in. Tan Paper (0.08mm) | |||
| Approximate Density (foam only) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) | |
SEND EMAIL TO US
