3M Double Coated Polyethylene Foam Tape

Min Order Quantity: 1000 Square Meters
Capacità di fornitura: 15000 metri quadrati
Porto: Shenzhen, Cina
Termini di pagamento: T / T, L / C, Paypal, Western Union
Tempi di consegna: circa 10-15 giorni

Invia richiesta

3M Double Coated Polyethylene Foam Tape

3M Double Coated Polyethylene Foam Tapes 4492G, 4492W, 4492B, 4496W and 4496B combine a conformable closed-cell foam with a high strength acrylic adhesive that provides good initial tack and offers high ultimate adhesion to a wide variety of surfaces.

Caratteristiche:

Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier.
High ultimate adhesion to a wide variety of surfaces.
Conformable tape bonds to irregular surfaces.
Unique rubber adhesive system provides quick stick.
Adheres well to most low surface energy (LSE) materials

Dettagli sul confezionamento:

Export standard packing for Double Coated Polyethylene Foam Tape. (If customers have special requirements, we also can make accordingly.)

I nostri vantaggi competitivi di fabbrica:

Prezzi competitivi e controllo di alta qualità
Pronta consegna
Prodotti ecocompatibili
In una varietà di design
Piccolo ordine accettabile
OEM accettato

Nota: tutti i dati contenuti in questo documento si basano sul metodo di prova standard cinese, sono valori medi, non devono essere utilizzati per uno scopo specifico. Tutte le dichiarazioni, le informazioni tecniche e le raccomandazioni contenute si basano su test che riteniamo affidabili, ma consigliamo vivamente ai clienti di eseguire i propri test e decidere se il prodotto è adatto a uno scopo particolare o al metodo di applicazione.

Queste proprietà del prodotto sono suggestive e tutti i prodotti possono essere personalizzati o convertiti per soddisfare requisiti applicativi specifici. Vi preghiamo di contattarci per discutere le vostre esigenze specifiche dell'applicazione.

Signs, Nameplates and Plaques.
Point of Purchase and other Displays.
Plastic Hooks, Racks and Dispensers.
Wire and Cable Clips – meets UL Spec QOQW2.MH17478.
Appliance, Display Case and Electronic Equipment Trim.

Typical Physical Properties:

Typical Physical Properties and Performance Characteristics		Tapes 4462W / 4462B	Tapes 4466W / 4466B	Tapes 4492W / 4492B	Tapes 4496W / 4496B
Peel Adhesion: To Stainless Steel Room Temperature 90° Angle Peel 12in./min. Jaw Speed (308mm/min.) 72-hour Dwell ASTM D-3330		8lb./in. width (140N/100mm)	8lb./in. width (140N/100mm)	8lb./in. width (140N/100mm)	8lb./in. width (140N/100mm)
Static Shear: 1/2in.²(3.23cm²) overlap will hold for ASTM D-3654	72°F(22°C)	1000g	1000g	1000g	1000g
	120°F(49°C)	250g	250g	500g	500g listed weight
	158°F(70°C)	-	-	250g	250g 10,000 min.
Normal Tensile: (T-Block) 1 in.²(6.45cm²) Jaw Speed 2 in./min. (50mm/min.) 72 hour Dwell ASTM D-897		60lb./in.² (415kPa)	40lb./in.² (275kPa)	60lb./in.² (415kPa)	40lb./in.² (415kPa)
Dynamic Shear: 1 in.² (6.45cm²) overlap Jaw Speed 0.5 in./min. (12.7mm/min.) ASTM D-1002		55lb./in.² (380kPa)	35lb./in.² (240kPa)	55lb./in.² (380kPa)	35lb./in.² (240kPa)
Resistenza alla temperatura	Short Term (Minutes, Hours)	158°F (70°C)		180°F (82°C)
	Long Term (Days, Weeks)	120°F (49°C)		158°F (70°C)
U.V. Resistance		Not recommended for direct exposure to U.V. light.		No apparent degradation when exposed for seven days in U.V. chamber.
Solvent Resistance: Splash testing cycle-20 seconds submersion, 20 sec. air dry, 3cycles		No apparent degradation when exposed to splash testing of typical hydrocarbon solvents.

Costruzione:

Construction		Tapes 4462W / 4462B	Tapes 4466W / 4466B	Tapes 4492W / 4492B	Tapes 4496W / 4496B
Tipo adesivo		745 (Rubber Adhesive)		430 (Acrylic Adhesive)
Adhesive Carrier		Closed Cell Crosslinked Polyethylene Foam		Closed Cell Crosslinked Polyethylene Foam
Spessore	Nominal	1/32in. 0.031in. (0.8mm)	1/16in. 0.062in. (1.6mm)	1/32in. 0.031in. (0.8mm)	1/16in. 0.062in. (1.6mm)
	Tolerance	0.025-0.045in. (0.6-1.0mm)	0.053-0.080in. (1.4-2.0mm)	0.025-0.045in. (0.6-1.0mm)	0.053-0.080in. (1.4-2.0mm)
Foam Color		White(W) / Black(B)	White(W) / Black(B)	White(W / Black(B) / Grey(G)	White(W) / Black(B)
Release Liner		0.003in. White Paper (0.08mm)		0.003in. Tan Paper (0.08mm)
Approximate Density (foam only)		6 lb./ft.³ (95kg/m³)	4 lb./ft.³ (65kg/m³)	6 lb./ft.³ (95kg/m³)	4 lb./ft.³ (65kg/m³)

INVIA EMAIL A NOI