Die Cut Poron Foam Tape With Adhesive Any Shape

Lieu d'origine: Guangdong, Chine
Nom de la marque: Xinst
Material: Poron
Caractéristique: résistant à la chaleur
Use: Masking
Adhésif : Acrylique
Adhesive Side: Double Sided
Type d'adhésif : sensible à la pression
Design Printing: No Printing
Size: Customized Size
Customized Service: Die Cut Any Shape
Name: Poron Foam tape

envoyer une demande

Ruban mousse poron découpé avec adhésif Toute forme Description

Le ruban en mousse PORON est une mousse d'uréthane à cellules ouvertes à pas fin produite par Rogers Corporation.
The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns.

Caractéristiques du ruban mousse Poron découpé:

• Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.

• Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.

• Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications.

• Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface.

• Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies.

• Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side.

Découpe d'autres produits de rubans:

1) Ruban double face 3M / TESA / NITTO, ruban adhésif double face en tissu / PET / mousse,

2) Découpe des produits EMI de bande d'aluminium / cuivre,

3) Film protecteur PET de découpe pour mobiles et produits 3C,

4) Ruban double face en mousse acrylique de découpe,

5) Joint d'étanchéité d'isolation de découpe, tel que mousse EVA, PORON, ÉPONGE, EPDM.

6) tout autre matériau peut être découpé.

If the pet insulation transformer mylar tape caters to your requirement, please be free to buy the quality products made in China with our professional manufacturers and suppliers in China. We’re equipped with a productive factory at your service.

Poron Foam tape Applications:

• Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications.

• For Sealing, Gasketing, and Cushioning.

Matériel	Poron Foam
Couleur	Black
Size	According your requirement
Résistance à la température	100℃
traits	1. It has excellent airtightness to avoid gas release and atomization. 2. Compression and deformation resistance, that is, elasticity and durability, which can guarantee the long-term shock-proof protection of the accessories. 3. It is flame retardant, does not contain harmful substances, does not remain, does not pollute the equipment, and is not corrosive to metals. 4. It can be used in a variety of temperature ranges. It can be used from minus 40 degrees Celsius to 90 degrees. 5. The surface has excellent wettability, easy to bond, easy to make, and easy to punch. 6. Engineering polyurethane formula provides a wide range of modulus-2-90 psi @ 25% deviation-to meet more design flexibility requirements
Épaisseur	0.5mm

ENVOYEZ-NOUS UN EMAIL