Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500

Min Order Quantity: 1000 Square Meters
Supply Ability: 15000 Square Meters
Port: Shenzhen, China
Payment Terms: T/T, L/C, Paypal, Western Union
Delivery Time: About 10-15 days

Send Inquiry

Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500

BISCO Solid Silicone materials are designed for high temperature/high-pressure gasketing applications. They are available in a range of thicknesses and durometers to meet a variety of customer needs and requirements. Grades are also available with fiberglass reinforcement for added dimensional stability and with increased tear strength.

Our General Purpose Silicone Rubbers are firmer in nature and offer resistance to high temperatures, tear, and most fluids for general industrial type applications.

Packaging Details:

Export standard packing for Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500. (If customers have special requirements, we also can make accordingly.)

Our Factory Competitive Advantages:

Well Competitive Prices and High Quality Control
Prompt Delivery
Earth-friendly Products
In a Variety of Design
Small Order Acceptable
OEM Accepted

Note: All data contained in this document base on china standard test method, they are average values, they should not be used for a specific purpose. All statements, technical information, and recommendations contained are base upon tests that we believe are reliable, but we strongly recommend clients should do their own tests and decide whether the product is fit for a particular purpose or the method of application.

These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.

Typical Physical Properties		Test Method	HT-1240	HT-1250	HT-1260	HT-1270	HT-1500
	Durometer, Shore "A" (pts)	ASTM D-2240	40±5	50±5	60±5	70±5	75±10
	Tensile Strength, psi (MPa)	ASTM D-412	825 (5.7)	950 (6.6)	1050 (7.2)	1150 (7.9)	300 (5.3)
	Elongation, %	ASTM D-412	350	300	250	200	N/A
	Tear Strength, ppi (kN/m)	ASTM D-624	50 (8.8)	70 (12.2)	75 (13.1)	90 (15.8)	N/A
	Compression Set, % 70hr @ 302°F (150°C)	ASTM D-395 (B)	20	20	20	25	25
Effect of Dry Heat Aging 70hr @ 437°F (225°C)	Change in Hardness, Shore "A" (pts)	ASTM D-573	±5	±5	±5	±5	-5 to +10
	Change in Tensile Strength, %	ASTM D-573	-15	-15	-15	-15	-20
	Change in Elongation, %	ASTM D-573	-35	-35	-35	-35	N/A
Effect of Oil Immersion ASTM #1 Oil 70hr @ 302°F (150°C)	Change in Hardness, Shore "A" (pts)	ASTM D-471	-10 to +5	-10 to +5	-10 to +5	-10 to +5	-10 to +5
	Change in Tensile Strength, %	ASTM D-471	-10	-10	-10	-10	-20
	Change in Elongation, %	ASTM D-471	-15	-15	-15	-15	N/A
	Change in Volume, %	ASTM D-471	+5	+5	+5	+5	+10
Electrical & Thermal Properties	Dielectric Constant	ASTM D-150	3.0	3.0	3.1	3.2	3.2
	Dielectric Strength, Volts/mil	ASTM D-149	400	400	400	400	400
	Volume Resistivity, Ohm-cm	ASTM D-257	10¹⁴	10¹⁴	10¹⁴	10¹⁴	10¹⁴
	Thermal Conductivity, BTU in/hr/ft²/°F (W/m °K)	ASTM D-518	1.7 (0.25)	1.8 (0.26)	1.9 (0.27)	2.1 (0.30)	2.0 (0.29)
Environmental Resistance	Volume Change from Water Immersion %, 70hr. @ 212°F (100°C)	ASTM D-471	+10	+5	+5	+5	+5
	Low Temperature Embrittlement, °F (°C)	ASTM D-2137	-80 (-62)	-80 (-62)	-80 (-62)	-80 (-62)	-80 (-62)
	Recommended Use Temperature, °F(°C)		-80 to 425 (-62 to 218)	-80 to 425 (-62 to 218)	-80 to 425 (-62 to 218)	-80 to 425 (-62 to 218)	-80 to 425 (-62 to 218)
Dimensions	Available Thickness Range, inches (mm)		0.020 to 0.125 (0.5 to 3.2)	0.020 to 0.125 (0.5 to 3.2)	0.020 to 0.125 (0.5 to 3.2)	0.020 to 0.125 (0.5 to 3.2)	0.031 to 0.125 (0.8 to 3.2)
	Standard Widths, inches (mm)		36 (914)	36 (914)	36 (914)	36 (914)	36 (914)
	Standard Colors		Red	Red	Red	Red	Red
Spcifications Available	A-A-59588		40	50	60	70	N/A
Spcifications Available	AMS Specification		N/A	3302	3303	3304	3320

SEND EMAIL TO US