يتكون طلاء الفيلم البصري من وسط رقيق ، وهو نوع من المواد المتوسطة الضوئية التي تنشر شعاع الضوء عبر الواجهة. بدأ تطبيق الأفلام البصرية في الثلاثينيات. تم استخدام الأفلام البصرية الحديثة على نطاق واسع في مجال البصريات وتكنولوجيا الإلكترونيات الضوئية ، وتصنيع الأدوات البصرية المختلفة.

تشمل أجهزة الأغشية الرقيقة الضوئية الرئيسية فيلم عاكس ، فيلم مضاد للانعكاس ، فيلم مستقطب ، مرشح تداخل ومشتت شعاع ، إلخ. لقد تم استخدامها على نطاق واسع في بناء الاقتصاد الوطني والدفاع الوطني ، وحظيت باهتمام متزايد من العلم و العمال الفنيين. على سبيل المثال ، يمكن أن يؤدي استخدام الأفلام المضادة للانعكاس إلى تقليل فقد التدفق الضوئي للعدسات البصرية المعقدة بمقدار عشر مرات ؛ يمكن أن يؤدي استخدام المرايا عالية الانعكاس إلى مضاعفة طاقة إخراج الليزر ؛ يمكن أن يؤدي استخدام الأفلام الضوئية إلى تحسين كفاءة واستقرار خلايا السيليكون الكهروضوئية.

1. الهيكل

The simplest optical film model is a thin layer with a smooth surface and an isotropic homogeneous medium. In this case, the optical interference theory can be used to study the optical properties of optical films. When a monochromatic plane wave is incident on the optical film, multiple reflections and refractions occur on its two surfaces. The directions of the reflected light and the refracted light are given by the laws of reflection and refraction, and the amplitudes of the reflected and refracted light The size is determined by the Fresnel formula

2. Features

The characteristics of the optical film are: the surface is smooth, the interface between the film layers is geometrically divided; the refractive index of the film layer can change at the interface, but it is continuous within the film layer; it can be a transparent medium or it can be

Optical film

Absorbing medium; can be uniformly normal or non-uniformly normal. The actual applied film is much more complicated than the ideal film. This is because: during preparation, the optical and physical properties of the film deviate from the bulk material, and its surface and interface are rough, resulting in diffuse scattering of the light beam; the interpenetration between the film layers forms a diffusion interface; due to the growth of the film layer , Structure, stress and other reasons, the anisotropy of the film is formed; the film layer has a complex time effect.

Filter introduction:

Used to select the optical device of the required radiation band. A common feature of filters is that no filter can make the image of a celestial body brighter, because all filters absorb certain wavelengths, which makes objects darker.

Filter principle:

The filter is made of plastic or glass and then added with special dyes. The red filter can only let red light through, and so on. The transmittance of the glass sheet is originally similar to that of air, and all colored light can pass through, so it is transparent, but after dyeing, the molecular structure changes, the refractive index also changes, and the passage of certain colored light changes. For example, a beam of white light passes through a blue filter and emits a beam of blue light, while green light and red light are very few, and most of them are absorbed by the filter.

One, anti-reflection film

يُطلق عليه أيضًا الطلاء المضاد للانعكاس ، وتتمثل وظيفته الرئيسية في تقليل أو إزالة الضوء المنعكس من الأسطح البصرية مثل العدسات والمنشورات والمرايا المستوية ، وبالتالي زيادة نقل الضوء لهذه المكونات وتقليل الضوء الشارد من النظام أو القضاء عليه.

ثانيًا ، الفيلم البصري

الفيلم المضاد للانعكاس هو الفيلم البصري الأكثر استخدامًا والأكبر. لذلك ، لا يزال موضوع بحث مهم في تكنولوجيا الأفلام البصرية. ينصب تركيز البحث على إيجاد مواد جديدة ، وتصميم أنظمة أفلام جديدة ، وتحسين عملية الترسيب. يستخدم أقل عدد من الطبقات ، وهو العملية الأبسط والأكثر استقرارًا للحصول على أعلى عائد ممكن وتحقيق أفضل النتائج. بالنسبة للفيلم الرقيق بالليزر ، فإن الفيلم المضاد للانعكاس هو الحلقة الضعيفة لتلف الليزر ، وكيفية زيادة قوة تدميره هي أيضًا واحدة من القضايا التي يهتم بها الناس أكثر.

ثلاثة ، فيلم عاكس

Its function is to increase the reflectivity of the optical surface. Reflective films can be generally divided into two categories, one is metal reflective film, and the other is all-dielectric reflective film. In addition, there are metal dielectric reflective films that combine the two.

Four, interference filter

It is a type of optical film with the most variety and complicated structure. Its main function is to split the spectral band. The most common interference filters are cut-off filters and band-pass filters. The cut-off filter can divide the considered spectrum into two parts, one part does not allow light to pass (called the cut-off region), and the other part requires light to pass through (called the band-pass region). According to the position of the passband in the spectral region, it can be divided into two kinds of long-wave pass and short-wave pass. Their simplest structures are respectively, where H and L represent thick high and low refractive index layers, and m is the number of periods. The film system having the above structure is called a symmetric periodic film system. If the considered spectral region is wide or the passband transmittance ripple requirements are high, the film structure will be more complicated.

Five, spectroscopic film

According to certain requirements and certain methods, the light beam is divided into two parts. The beam splitting film mainly includes wavelength splitting film, light intensity splitting film and polarizing beam splitting film.

The wavelength splitting film is also called two-color splitting film. As the name implies, it is a film that divides the light beam into two parts according to the wavelength region. This film can be a cut-off filter or a band-pass filter. The difference is that the wavelength splitting film must consider not only transmitted light but also reflected light. Both require a certain shape of the spectral curve. The wavelength splitting film is usually used at a certain angle of incidence. In this case, the spectral curve will be distorted due to the influence of polarization. In order to overcome this effect, the problem of depolarization of the film must be considered.

The polarization beam splitting film is made by utilizing the polarization effect of the film when the light is incident obliquely. The polarization beam splitting film can be divided into two types, a prism type and a flat plate type. The prismatic polarizing film utilizes the polarization effect of the interface when Brewster angle is incident. When the light beam always enters the interface of two materials at Brewster's angle, no matter how many thin film layers there are, the reflected light of the horizontal vibration is always zero, and the light of the vertical component vibration increases with the number of thin film layers. Increased, as long as the number of layers is sufficient, the transmitted light beam can be basically vibrated in the parallel direction, and the reflected beam is basically light that is vibrated in the vertical direction, so as to achieve the purpose of polarized beam splitting. The Brewster angle at the interface of the thin film material, so the film must be plated on the prism, then the incident medium is not air but glass. The flat-type polarizing film is mainly made of the difference in the bandwidth of the reflection bands of the two polarized components of the dielectric reflective film when obliquely incident. In general high-reflection films, as the incident angle increases, the reflection bandwidth of the vertical component gradually increases, and the bandwidth of the parallel component gradually decreases. Selecting the high reflection area of ​​the vertical component and the high transmission area of ​​the parallel component as the working area can form a polarizing film that reflects the vertical component through the parallel component. The incident angle of this polarizing film is generally selected near the Brewster angle of the substrate . The working wavelength range of the prism-type polarizing film is relatively wide, and the degree of polarization can also be made relatively high, but its preparation is cumbersome, difficult to make large, and the laser resistance is relatively low. The wavelength range of flat polarizers is relatively narrow, but it can be made very large and the laser resistance is relatively high, so it is often used in strong laser systems.