UV-uithardbare blokkiesband vir wafersny
Min Order Quantity: 1000 Square Meters
Voorsieningsvermoë: 15000 vierkante meter
Poort: Shenzhen, China
Betalingsvoorwaardes: T / T, L / C, Paypal, Western Union
Levertyd: Ongeveer 10-15 dae
UV-uithardbare blokkiesband vir wafersny
It Is As Polyolefin Film As Backing, Coated With UV Adhesive, Then Coated With PET Release Liner.
Verpakking Besonderhede:
Export standard packing for UV Curable Dicing Tape For Wafer Cutting. (If customers have special requirements, we also can make accordingly.)
Opmerking: alle gegewens wat in hierdie dokument vervat is, berus op die standaardmetode van China, dit is gemiddelde waardes en moet nie vir 'n spesifieke doel gebruik word nie. Alle verklarings, tegniese inligting en aanbevelings is gebaseer op toetse wat ons glo betroubaar is, maar ons beveel sterk aan dat kliënte hul eie toetse moet doen en moet besluit of die produk geskik is vir 'n spesifieke doel of vir die toepassing.
Hierdie produk-eienskappe is suggestief en alle produkte kan aangepas of omgeskakel word om aan spesifieke toepassingsvereistes te voldoen. Kontak ons asseblief om u unieke toepassingsbehoeftes te bespreek.
Ons mededingende voordele in die fabriek:
Well Competitive Prices and High Quality Control.
Prompt Delivery.
Earth-friendly Products.
In a Variety of Design.
Small Order Acceptable.
OEM Accepted.
Roll Size: 3″ paper or plastic core;tape width: 2mm -1200mm; standard width: 1200mm, standard length: 50M.
OEM Size: Special length, thickness or combinations can be supplied per customer’s request. Products can be supplied in roll, tape, sheets or shapes per customer’s request. Only you provide the CAD drawing, we can die cut any size for you.
Houdbaarheid: Om die beste werkverrigting te behaal, gebruik hierdie produk binne 12 maande vanaf afleweringsdatum en bewaar dit onder normale omstandighede van 60 ºC tot 80 ºF (16 ºC tot 27 ºC) en 40 tot 60% RH in die oorspronklike karton.
- Suitable for made from silicon wafer cutting process protection.
- Suitable for ITO glass, COVER LENS glass COVER chemical intensification of the acid etching process.
- Other need stick tightly high protection, later need easy tear off process protection.
Item | Waarde | Remark | |
Total Thickness (μm) | 170 | / | |
Width | 1200mm | Customized | |
Length | 100 | / | |
Base Film (μm) | Polyolefin / 150 | Material / Thickness | |
Kleur | Clear | / | |
Adhesive layer (μm) | UV Acrylic/20 | Material / Thickness | |
Adhesion (g/25mm) | Before UV | 2000±100 | Conforms to JIS Z 0237(1) |
After UV(3) | 25±5 | - | |
PET Release Line (μm) | 36 | Dikte | |
JIS Z0237: Peeling speed=300mm/min, Peeling angle=180 deg. | |||
UV Irradiation Conductions: | UV ray intensity: 230mW/cm² | ||
UV ray dosage: 190mJ/cm² | |||
Wave length of ultraviolet should be around 365nm. If light source is led, the recommended lighting time is around 20 second. |