3M Polyimide film elektriese band 92 met silikoon druk sensitiewe kleefmiddel
Plek van herkoms: KwaZulu-Natal, China
Handelsnaam: 3M
Model nommer: 92 #
Kleefmiddel: Termohardende silikoon
Kleefkant: enkelkant
Kleefmiddel: Drukgevoelig, water geaktiveer
Materiaal: Polyimide
Funksie: ANTISTATIES
Gebruik: MASKERING
Kleur: Amber
Breedte: 10-305 MM
Lengte: 33m
Grootte: 0,076mm * 305mm * 33m
Voorbeeld: vrylik
Dikte: 0,076 MM
MOQ: 500
Handelsmerk: 3M
3M Polyimide film elektriese band 92 met silikoon druk sensitiewe kleefmiddel
3M Polyimide Film Electrical Tape 92 is a 1-mil polyimide film backing with silicone adhesive. Its silicone pressure-sensitive adhesive allows it to be used at
356ºF (180ºC), and it is UL 510 Flame Retardant. Like most insulated tapes, from 3M, Tape 92 is available in standard and custom widths and lengths. The
standard length is 36 yards, and can be cut to widths ranging from 1/4” to 23”. Longer lengths up to several times normal length are possible, dependent upon width.
3M Polyimide Film Electrical Tape 92 Features:
♦Powder coating protection
♦Glass sandblasting protection
♦Paint spray protection
♦Ordinary surface protection
♦ Silicone Adhesive Heat Resistant High Temperature Polyimide Tape
♦ High temperature, solvent resistant, stable and reliable
♦ Easy peel off no glue residue
♦ H-class insulation
♦ Suitable for pcb 3d printing and transformer insulation
♦ Strong tensile strength
♦ Offer sheet or roll material or diecut processing.
Ons mededingende voordele in die fabriek:
Goed mededingende pryse en hoë gehaltebeheer
Vinnige aflewering
Aardvriendelike produkte
In 'n verskeidenheid ontwerp
Klein bestelling aanvaarbaar
OEM aanvaar
Rolgrootte: 3 ″ papier- of plastiekkern; bandbreedte: 2 mm -1200 mm; standaard breedte: 1200mm, standaard lengte: 50M
OEM-grootte: Spesiale lengte, dikte of kombinasies kan per versoek van die kliënt verskaf word.
band, velle of vorms per kliënt se versoek verskaf word. Slegs u die CAD-tekening verskaf, kan ons enige grootte vir u sny.
Houdbaarheid: Gebruik die produk binne 12 maande vanaf aflewering om die beste prestasie te behaal en berg dit onder normale omstandighede
van 60 ºC tot 80 ºF (16 ºC tot 27 ºC) en 40 tot 60% RH in die oorspronklike karton.
As die 3M Polyimide Film Elektriese Tape 92 met 'n Silikoon-drukgevoelige kleefmiddel volgens u behoefte is, kan u die produkte van gehalte wat in China vervaardig word, by ons professionele vervaardigers en verskaffers in China koop. Ons is toegerus met 'n produktiewe fabriek tot u diens.
Application:
3M 92 Tape is used for high-temperature electrical applications in which a tough,
thin insulating material is required for wrapping coils, transformers, capacitors,
wire harnesses, and for anchoring leads / terminal boards. It also is used in
printed circuit board assembly as a wave solder masking tape.
Production name
|
3M 92 Polyimide Film Adhesive Tapes
|
||
Materiaal
|
Polyimide film + Silicone adhesive |
||
Kleur
|
Amber
|
||
Adhesion to Steel:
|
>6N/25mm |
||
Tensile Strength:
|
115N/25mm
|
||
Temperature Resistance:
|
260°C~280°C
|
||
Elongation:
|
>50 %
|
||
Dielectric Strength:
|
5,000 volts
|
||
Usage
|
It is used as a ground, barrier and phase insulation in high performance torridal coils, high frequency motors. It can be used for end turn bundling and connection insulation in small motors. It is also used for cross-over insulation and out wraps on bobbin wound and form wound coils for large rotating machines to bundle conductors and reinforce insulation and it can also be used as wave solder masking of printed circuit boards.
|
||
Funksie
|
♦Powder coating protection
♦Glass sandblasting protection ♦Paint spray protection ♦Ordinary surface protection ♦ Silicone Adhesive Heat Resistant High Temperature Polyimide Tape ♦ High temperature, solvent resistant, stable and reliable ♦ Easy peel off no glue residue ♦ H-class insulation ♦ Suitable for pcb 3d printing and transformer insulation ♦ Strong tensile strength ♦ Offer sheet or roll material or diecut processing. |
||
Advantage
|
1.Factory supplier: Factory price polymide tape for 3D printer
2.Competitive price:Factory direct sales, professional production, quality assurance, 3.Perfect service:Delivery in time,and any question will be replied in 24 hours |
||
Sample provide |
1. We send sample A4 paper size for free
2. Customer shall bear the freight charges 3. Sample and freight charge just a show of your sincerity 4. All sample related cost shall be returned after first deal 5. It is workable to most of our clients Thanks for cooperation |
||
Sample lead time
|
3-5days
|
||
Port
|
Shenzhen
|
||
Payment
|
L/C, T/T,Western Union,Paypal,Escrew,Ali payment
|