3M Double Coated Polyethylene Foam Tape
Min Order Quantity: 1000 Square Meters
Voorsieningsvermoë: 15000 vierkante meter
Poort: Shenzhen, China
Betalingsvoorwaardes: T / T, L / C, Paypal, Western Union
Levertyd: Ongeveer 10-15 dae
3M Double Coated Polyethylene Foam Tape
3M Double Coated Polyethylene Foam Tapes 4492G, 4492W, 4492B, 4496W and 4496B combine a conformable closed-cell foam with a high strength acrylic adhesive that provides good initial tack and offers high ultimate adhesion to a wide variety of surfaces.
Kenmerke:
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier.
- High ultimate adhesion to a wide variety of surfaces.
- Conformable tape bonds to irregular surfaces.
- Unique rubber adhesive system provides quick stick.
- Adheres well to most low surface energy (LSE) materials
Verpakking Besonderhede:
Export standard packing for Double Coated Polyethylene Foam Tape. (If customers have special requirements, we also can make accordingly.)
Ons mededingende voordele in die fabriek:
- Goed mededingende pryse en hoë gehaltebeheer
- Vinnige aflewering
- Aardvriendelike produkte
- In 'n verskeidenheid ontwerp
- Klein bestelling aanvaarbaar
- OEM aanvaar
Opmerking: alle gegewens wat in hierdie dokument vervat is, berus op die standaardmetode van China, dit is gemiddelde waardes en moet nie vir 'n spesifieke doel gebruik word nie. Alle verklarings, tegniese inligting en aanbevelings is gebaseer op toetse wat ons glo betroubaar is, maar ons beveel sterk aan dat kliënte hul eie toetse moet doen en moet besluit of die produk geskik is vir 'n spesifieke doel of vir die toepassing.
Hierdie produk-eienskappe is suggestief en alle produkte kan aangepas of omgeskakel word om aan spesifieke toepassingsvereistes te voldoen. Kontak ons asseblief om u unieke toepassingsbehoeftes te bespreek.
- Signs, Nameplates and Plaques.
- Point of Purchase and other Displays.
- Plastic Hooks, Racks and Dispensers.
- Wire and Cable Clips – meets UL Spec QOQW2.MH17478.
- Appliance, Display Case and Electronic Equipment Trim.
Typical Physical Properties:
Typical Physical Properties and Performance Characteristics | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
Peel Adhesion: To Stainless Steel Room Temperature 90° Angle Peel 12in./min. Jaw Speed (308mm/min.) 72-hour Dwell ASTM D-3330 | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | |
Static Shear: 1/2in.²(3.23cm²) overlap will hold for ASTM D-3654 | 72°F(22°C) | 1000g | 1000g | 1000g | 1000g |
120°F(49°C) | 250g | 250g | 500g | 500g listed weight | |
158°F(70°C) | - | - | 250g | 250g 10,000 min. | |
Normal Tensile: (T-Block) 1 in.²(6.45cm²) Jaw Speed 2 in./min. (50mm/min.) 72 hour Dwell ASTM D-897 | 60lb./in.² (415kPa) | 40lb./in.² (275kPa) | 60lb./in.² (415kPa) | 40lb./in.² (415kPa) | |
Dynamic Shear: 1 in.² (6.45cm²) overlap Jaw Speed 0.5 in./min. (12.7mm/min.) ASTM D-1002 | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | |
Temperatuurweerstand | Short Term (Minutes, Hours) | 158°F (70°C) | 180°F (82°C) | ||
Long Term (Days, Weeks) | 120°F (49°C) | 158°F (70°C) | |||
U.V. Resistance | Not recommended for direct exposure to U.V. light. | No apparent degradation when exposed for seven days in U.V. chamber. | |||
Solvent Resistance: Splash testing cycle-20 seconds submersion, 20 sec. air dry, 3cycles | No apparent degradation when exposed to splash testing of typical hydrocarbon solvents. |
Konstruksie:
Construction | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
Kleefmiddel | 745 (Rubber Adhesive) | 430 (Acrylic Adhesive) | |||
Adhesive Carrier | Closed Cell Crosslinked Polyethylene Foam | Closed Cell Crosslinked Polyethylene Foam | |||
Dikte | Nominal | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) |
Tolerance | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | |
Foam Color | White(W) / Black(B) | White(W) / Black(B) | White(W / Black(B) / Grey(G) | White(W) / Black(B) | |
Release Liner | 0.003in. White Paper (0.08mm) | 0.003in. Tan Paper (0.08mm) | |||
Approximate Density (foam only) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) |